Receiver Tube Replacement
- Price
- $50
Replacement Receiver Tubes for Original Hammock Mount and Mammoth Mount models. Please note - this does not include a Hitch Pin, or the Bolt for mounting the receiver tube.
Receiver Tube Options:
#1: 2in Standard Length Receiver Tube. This works for most applications (4" and 5" from hitch pin hole to frame). If your hitch is close to flush with your bumper, this length will work for you. Fits Class III, IV, and V hitches (reducer sleeve required if hitch size is greater than 2")
#2: 2in Extended Length Receiver Tube. This tube is recommended if you have a rear mounted spare tire, custom bumper, most front hitches or other unique applications. The Extended Receiver Tube offers +6" in total length with 4 holes at +0",+2", +4", and +6". Fits Class III, IV, and V hitches (reducer sleeve required if hitch size is greater than 2")
#3: 1.5" Standard Receiver Tube. This tube is necessary for mounting your Hammock Mount into your 1.5" receiver hitch (common on many EU and AU vehicles). Fits Class II hitches.
*3.5" engagement required between receiver tube and vehicle hitch
FAQs and Disclaimers
NOTE: Customer must verify if Hammock Mount will interfere with vehicle sensor systems. We have been made aware that certain newer vehicles and hitch configurations may have issues with hitch mounted accessories.
NOTE: For hitch mounted models- vehicle hitch must have minimum 2.5" distance from hitch face to pin hole center. Contact us for options if distance is less than this measurement.
Note: Raw aluminum parts may have some scratches and imperfections from the manufacturing process. Once you begin to use your original Hammock Mount, you will find that transportation, storage and normal use will contribute to this finish and the arms will develop their own character. The good news is that raw aluminum has excellent corrosion resistance and will not be affected by normal wear. However, if desired these parts can be polished, painted, or otherwise coated for aesthetics.
About Us
Adventure Hammock Systems is a subsidiary of McLean Metalworks, LLC. We are locally owned and operated out of Bend, Oregon and are committed to bringing the ability to Hammock Anywhere to each of your adventures.